Concrete Admixtures Product Range
Finished water-reducing admixtures supplied ready to dose — no further compounding required. Two lines are fully documented and available now; additional grades are supplied against specific requests.
Available product lines
Water-Reducing Admixtures Ready to Ship
Every product below is supplied as a finished admixture with batch COA, TDS and SDS. If you are replacing an existing supplier, tell us your current product type and dosage — we will compare cost per cubic metre rather than quoting a headline price per tonne.
Polycarboxylate Superplasticizer (PCE)
A high-range water reducer for applications that demand low dosage, strong water reduction and controllable slump retention: ready-mix concrete, precast elements, high-strength grades and self-compacting mixes.
- Tested water reduction: 29% (JG/T 223-2017)
- Solid content reported: 23.51%
- Low chloride and very low alkali content
View PCE products
Naphthalene-Based Superplasticizer (SNF)
The established, cost-efficient choice where purchase price drives the decision and cement tolerance matters more than ultra-low dosage. Widely used as a second source alongside existing suppliers.
- Tested water reduction: 23% (GB 8076-2008)
- Solid content reported: 38.04%
- Broad compatibility with local cement types
View naphthalene products
How to choose
PCE or Naphthalene? Decide on Cost per Cubic Metre
The two lines are not simply cheap versus expensive. PCE usually wins where dosage matters, where early strength shortens the precast demoulding cycle, or where slump retention over long haul times is critical. Naphthalene often wins on headline purchase price and forgiving behaviour with variable local cement.
Because the two differ in solid content, comparing price per tonne of liquid is misleading. The meaningful comparison is:
- Dosage required to reach your target slump
- Admixture cost per cubic metre of concrete at that dosage
- Any cement saved or strength gained, confirmed by your own trial
Send us your current dosage and landed cost, and we will run the comparison against both lines before we send anything physical. See the PCE range or the naphthalene range for technical data.
| Decision factor | PCE | Naphthalene |
|---|---|---|
| Purchase price level | Higher | Lower |
| Water reduction | 29% | 23% |
| Total alkali | 0.10% | 4.42% |
| Slump retention tuning | Wide | Limited |
| Cement tolerance | More sensitive | More forgiving |
Request-based grades
Additional Admixture Grades
Our production lines cover a wider catalogue. We list these honestly as available on request: each one requires its own TDS, SDS, trial data and quotation, and we do not publish figures borrowed from other products. If you need one, ask us for its specific documentation.
Retarding / slump-retention
Standard or high-range water reducers modified for extended transport time and hot weather.
Sulphamate-based high-range
For mixes where specific strength development or workability profiles are required.
Aliphatic high-range
Alternative chemistry for particular mix designs and cost structures.
Multi-purpose waterproofing agent
Integral waterproofing admixture for concrete and mortar applications.
Mortar admixture
For dry-mix and ready-mixed mortar producers requiring workability retention.
Water-based mould release agent
Used by precast plants for demoulding and surface finish. Compatible cross-sell line.
UEA expansive agent
Supplied in powder form for shrinkage-compensating and waterproof concrete.
Early strength agent
Available in powder or liquid grade for fast demoulding or cold-weather concreting.
Coal-water slurry dispersant
A separate industrial line for power-plant slurry applications — different buying process.
Not sure which grade fits your mix?
Send your cement brand, target strength, haul time and temperature range. We will recommend one grade — or tell you honestly that neither fits.